TDX Diamond Holesaw 5mm Pack of 5 – Precise Wet Drilling for Ceramic, Glass, Marble & Porcelain

Perfect for Tilers, Renovators, Installers & DIY Hard-Surface Drilling Projects

The TDX Diamond Holesaw 5mm Pack of 5 is designed for users who need accurate small-diameter holes through suitable hard surfaces. Featuring a 5mm cutting diameter and diamond grit cutting edge, these holesaws are suitable for ceramic, non-hardened glass, marble, and porcelain. Designed for wet use only and supplied as a convenient pack of five, they provide a practical solution for tiling, renovations, installations, repairs, and detailed hard-surface drilling projects.

Description – TDX Diamond Holesaw 5mm Pack of 5

The TDX Diamond Holesaw 5mm Pack of 5 is a specialised drilling accessory set designed for creating consistent 5mm circular openings in ceramic, suitable glass, marble, and porcelain.

Each holesaw features a diamond grit cutting edge designed to work through hard surfaces where conventional general-purpose drill bits may not provide suitable performance.

The compact 5mm diameter makes these holesaws particularly useful for smaller installation openings and detailed drilling applications. This can be beneficial when working with tiles, fixtures, fittings, and other projects where accurate positioning is important.

Ceramic is one of the primary specified materials. The holesaws can be used for suitable ceramic tile drilling during bathroom, kitchen, laundry, renovation, and installation projects.

Porcelain is also supported. Because porcelain can be particularly hard, a diamond grit cutting edge provides a dedicated solution for drilling suitable porcelain surfaces.

The holesaws can also drill marble, making the set useful for appropriate stone installation, renovation, and decorative projects where a 5mm opening is required.

Suitable glass can also be drilled, excluding hardened glass. Users should confirm the type of glass before beginning work, as these holesaws are not designed for hardened or toughened glass.

A key requirement is wet use only. Water should be used throughout the drilling process according to appropriate operating procedures.

Wet drilling helps control heat around the diamond grit cutting edge while working through hard materials. This supports appropriate cutting conditions and helps prevent excessive heat build-up during operation.

The holesaws should not be operated dry. Maintaining suitable water at the cutting area is an important part of correct product use.

For tilers, the 5mm diameter provides a useful option for smaller openings through ceramic and porcelain surfaces. This can be practical when preparing tiles for suitable fixtures, fittings, or other installation components.

Renovators and installers can also benefit from keeping small diamond holesaws available for detailed projects. Existing tiled or stone surfaces may need accurately positioned openings when new components are being fitted.

The small diameter requires controlled drilling technique. Users should position the holesaw carefully and avoid excessive pressure while the diamond edge begins cutting into the surface.

The workpiece should be appropriately supported before drilling. This is particularly important when working with brittle materials such as glass, ceramic, and porcelain.

For glass applications, users should verify that the material is not hardened or toughened. Attempting to drill unsuitable glass can result in material failure.

Supplied as a pack of five, this TDX set provides convenient replacement availability for users who regularly complete hard-surface drilling tasks.

Diamond cutting accessories naturally wear depending on the material, drilling technique, cooling, and frequency of use. Having five pieces available helps ensure replacements are ready during larger or ongoing projects.

The five-piece quantity is particularly practical for professional tilers and installers who may need to drill multiple holes across different job sites.

DIY users can also benefit from the pack size when completing bathrooms, kitchens, tiled areas, or other home improvement projects.

The holesaws should be checked before use, and any accessory showing excessive wear or damage should not be operated.

Users should also confirm compatibility with their drilling equipment and follow the power tool manufacturer's operating requirements.

Appropriate personal protective equipment should be used according to the tool manufacturer's instructions and working environment.

For New Zealand tilers, builders, renovators, installers, craftspeople, and DIY users, the TDX Diamond Holesaw 5mm Pack of 5 provides a practical combination of precise small-diameter drilling, diamond grit performance, and convenient replacement quantity.

Key Points

5mm Diamond Holesaws: Designed for precise small-diameter drilling through suitable ceramic, glass, marble, and porcelain surfaces.

Diamond Grit Cutting Edge: Provides the abrasive cutting action required for demanding hard-surface drilling applications.

Wet Use Only: Designed specifically for wet drilling to help control heat and maintain appropriate cutting conditions.

Convenient Pack of Five: Includes five holesaws for multiple drilling tasks and useful replacement availability.

Benefits

Precise Small Holes: Dedicated 5mm diameter provides consistent openings for suitable detailed installation and renovation requirements.

Versatile Hard-Surface Use: Suitable for ceramic, non-hardened glass, marble, and porcelain across a range of projects.

Ideal for Tile Installations: Useful for bathrooms, kitchens, laundries, renovations, and other tiled areas requiring smaller openings.

Practical Multi-Pack: Five pieces provide useful replacements for professional tradespeople and regular DIY projects.

Why Choose This TDX Diamond Holesaw 5mm Pack of 5?

The TDX Diamond Holesaw 5mm Pack of 5 is a practical choice for users who need precise small-diameter drilling through hard surfaces.

Its diamond grit cutting edge provides a dedicated solution for ceramic, porcelain, marble, and suitable glass, while the 5mm diameter makes it particularly useful for detailed installation work.

The wet-use-only design helps control heat during drilling, and the five-piece quantity provides convenient replacements for users completing multiple holes or ongoing projects.

For New Zealand tilers, renovators, installers, and DIY users, this TDX set provides a straightforward solution for accurate hard-surface drilling.

Please note that these holesaws are not suitable for hardened or toughened glass.

Conclusion

The TDX Diamond Holesaw 5mm Pack of 5 is a specialised drilling accessory set for ceramic, non-hardened glass, marble, and porcelain. Featuring a precise 5mm diameter and diamond grit cutting edge, the holesaws provide reliable performance for suitable tiling, renovation, installation, and repair applications.

Designed for wet use only and supplied as a pack of five, this TDX holesaw set provides practical replacement availability for New Zealand professional and DIY hard-surface drilling projects.