Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm – Thin & Efficient Metal Cutting Performance

Perfect for Metalworkers, Fabricators, Builders & DIY Cutting Projects

The Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm is designed for users who need efficient and controlled metal cutting with a compatible angle grinder. Featuring a thin 1.2mm profile, 125mm disc diameter, approximately 22.2mm arbor, A46R specification, and a maximum operating speed of 12,200 RPM, this cut-off disc provides a practical solution for fabrication, construction, repairs, maintenance, and general metalworking applications.

Description – Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm

The Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm is a purpose-designed abrasive cutting accessory for suitable metal applications. Designed for use with compatible angle grinders, it provides a thin cutting profile that supports efficient material removal and controlled cutting across a variety of metalworking projects.

With a 125mm diameter, this cut-off disc is suitable for compatible angle grinders designed to accept this common disc size. The practical diameter makes it useful for workshops, construction sites, fabrication projects, maintenance work, and home DIY applications.

One of the key characteristics of the disc is its 1.2mm thickness, equivalent to approximately 3/64". The thin profile is designed for cutting rather than grinding, allowing the disc to move through suitable metal with a relatively narrow cutting path.

A thinner cut-off disc can be useful when users want efficient cutting with less material removal than would occur with a substantially thicker abrasive disc. This makes it suitable for jobs where cutting speed and control are important.

The disc features an arbor measurement of approximately 22.2mm, corresponding to the commonly referenced 7/8" fitting. Users should always confirm the arbor size and disc diameter against their specific angle grinder before installation.

The Worksite Metal Cut-Off Disc carries an A46R specification. This identifies the abrasive disc type and provides users with a clear reference when selecting a replacement or matching the disc to suitable metal cutting requirements.

With a maximum rated operating speed of 12,200 RPM, the disc is designed for use within this stated limit. Users should always ensure that the angle grinder's operating speed does not exceed the maximum RPM marked for the cutting disc.

Correct disc selection and installation are important when using an angle grinder. The tool should be compatible with a 125mm disc and the specified arbor dimensions, and the disc should be installed according to the grinder manufacturer's requirements.

The thin 1.2mm design makes the disc particularly useful for general metal cutting tasks where a dedicated cut-off wheel is required. It can be incorporated into a workshop accessory collection alongside grinding discs, flap discs, wire wheels, and other angle grinder attachments.

For fabricators, the disc provides a practical cutting option for suitable metal components during fabrication and modification work. Its thin profile helps maintain an efficient cutting action without removing excessive material around the cut.

Builders and installers can also keep these cut-off discs available for suitable metal cutting encountered during construction and installation projects. Metal components may need to be trimmed or modified on site, making a compatible angle grinder and cutting disc a useful combination.

For maintenance and repair applications, the Worksite disc provides a straightforward solution for cutting suitable metal components where access and portability are important. Angle grinders are widely used because they can operate in locations where larger stationary cutting equipment may be impractical.

DIY users completing metalworking projects around the home or workshop can also benefit from the practical 125mm size. The disc can be used with a compatible grinder for appropriate cutting tasks while providing the convenience of a commonly used disc format.

Because this is a cut-off disc, it should be used for its intended cutting application rather than side grinding. Applying accessories according to their intended function helps support appropriate performance and safer tool operation.

Users should also inspect the disc before installation and avoid using a damaged, cracked, or compromised abrasive wheel. Appropriate guards and personal protective equipment should be used according to the power tool manufacturer's instructions and workplace requirements.

The combination of 125mm diameter, 1.2mm thickness, approximately 22.2mm arbor, and 12,200 maximum RPM provides clearly defined specifications for users selecting an appropriate cutting accessory.

For New Zealand metalworkers, fabricators, builders, maintenance professionals, and DIY users, the Worksite Metal Cut-Off Disc provides a practical solution for everyday metal cutting requirements with compatible angle grinders.

Key Points

125mm x 1.2mm x 22.2mm Size: Provides a practical cutting disc format for compatible 125mm angle grinders and suitable metalworking applications.

Thin 1.2mm Cutting Profile: Designed for efficient metal cutting with a relatively narrow cutting path and controlled material removal.

12,200 Maximum RPM: Clearly specified maximum operating speed helps users correctly match the disc with suitable angle grinder equipment.

A46R Disc Type: Provides a defined abrasive specification for easier identification and selection for appropriate metal cutting tasks.

Benefits

Efficient Metal Cutting: Thin disc profile helps users progress through suitable metal without the additional material removal associated with thicker grinding accessories.

Useful for Trade & Workshop Tasks: Suitable for fabrication, construction, maintenance, repairs, installation work, and DIY metalworking projects.

Common 125mm Format: Practical disc diameter makes it suitable for many compatible angle grinder setups used by tradespeople and home users.

Easy Accessory Selection: Clearly defined dimensions, arbor size, disc type, and maximum RPM make compatibility easier to check before use.

Why Choose This Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm?

The Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm is a practical choice for users who need a dedicated thin cutting wheel for suitable metal applications. Its 1.2mm profile is designed specifically for efficient cutting, making it more appropriate for this purpose than thicker grinding discs.

The common 125mm diameter provides compatibility with suitable angle grinders, while the approximately 22.2mm arbor offers a familiar fitting format for many tool setups.

For New Zealand fabricators, builders, installers, and DIY users, the clearly specified 12,200 maximum RPM and A46R type make it straightforward to identify the disc's operating requirements before use.

Whether cutting suitable metal during fabrication, completing repairs, or making modifications during construction work, this Worksite cut-off disc provides a simple and effective angle grinder accessory for everyday metalworking tasks.

Conclusion

The Worksite Metal Cut-Off Disc 125mm x 1.2mm x 22.2mm is a thin abrasive cutting accessory designed for efficient metal cutting with compatible angle grinders. Featuring a 125mm diameter, 1.2mm thickness, approximately 22.2mm arbor, A46R specification, and maximum speed of 12,200 RPM, it provides clearly defined performance characteristics for professional and DIY applications.

Ideal for New Zealand workshops, construction sites, fabrication projects, repairs, and home metalworking tasks, this Worksite cut-off disc provides a practical solution for controlled and efficient metal cutting.